As time goes on, the power source of automobiles will eventually abandon the traditional internal combustion engines and more and more new energy vehicles will enter the market. However, at this stage, traditional fuel vehicles still play a leading role, but more and more vehicles use small displacement turbocharging. As ordinary household vehicles, what should we do? How about the choice?
When the engine works, it needs to inhale a lot of fresh air to support fuel combustion, which involves the way of intake of the engine. The way of intake can be divided into natural intake and pressurized intake. Turbocharger and mechanical turbocharger are common in supercharged intake, because the mechanical turbocharger consumes the power of the engine itself. This is not very suitable for small displacement engines, and turbocharging is more appropriate, so in this article we will only discuss turbocharger actuators.
What are the mainstream domestic turbines?
At present, mainstream manufacturers have their own small-displacement turbocharged engines. Volkswagen has 1.2T and 1.4T turbocharged engines in China. They are mounted on Langyi, Lingdu and Passat. There are 1.0T three-cylinder turbocharged engines in Europe. GM has 1.0T, 1.3T and 1.5T turbocharged turbocharged small-displacement turbocharged engines, and Ford has 1.0T and 1.5T turbocharged turbocharged small-displacement turbocharged engines.（ Fox 1.5T three-cylinder, winged tiger 1.5T four-cylinder; Toyota also has 1.2T turbocharging, mounted on Carola and Reynolds; Honda also has 1.0T and 1.5T, which are mounted on Frontfan and Civic.
Advantages and Disadvantages of Natural Inhalation/Turbocharging
Natural inspiratory structure is relatively simple
The intake principle of a naturally aspirated engine is relatively simple. It is only a form of intake that relies on the vacuum negative pressure generated by the downward motion of the piston to directly press air into the combustion chamber of the engine. Air filters directly into the intake port and then into the cylinder.
Different from the mechanical supercharger installed directly on the engine, the turbocharger is installed at the exhaust end of the engine, using the exhaust gas from the engine to drive the turbine, the turbine then drives the impeller, compressed air pressurized into the cylinder, so the structure of the turbocharged engine is more complex than that of the natural aspiration engine.
Natural inspiratory power output is relatively linear
The throttle pedal sends out signals to the engine computer, and then the throttle opening is controlled by the computer. The power of natural aspiration is more easily controlled. Especially in the slight operation, always keep the throttle at a certain opening, natural suction car acceleration more smoothly, acceleration is more average.
Turbocharger's turbocharger intervention needs to reach some specific request, such as speed or speed. If those cars with poor matching of turbocharger and initiator have a very abrupt dynamic performance, that is to say, the vehicle will move forward rapidly, and the use of the experience is not good.
Similar displacement of turbocharging power is smaller
Turbocharged starters are not necessarily fuel-efficient. Because of the turbocharging effect, a 1.4T starter can have 1.8L or more displacement starter power, but its fuel consumption is higher than that of a 1.4L displacement starter. Now, the trend is that many domestic cars use smaller displacement turbocharging instead of the relatively high displacement of natural inspiration, coupled with direct injection, variable valve timing and a series of technology support, small displacement turbocharged vehicle fuel economy is quite good.
Turbocharger Maintenance Requirements Higher
The structure of turbocharged engine is more complex than natural suction, and the working environment is more complex than natural suction. Therefore, the lubrication effect of engine oil is more demanding. Generally, synthetic engine oil is chosen as far as possible in the maintenance of Turbocharged engine, while many natural suction engines can also add mineral engine oil, so the maintenance is more demanding. It will be cheaper.
Because the turbine is driven by the exhaust gas discharged from the cylinder, when the engine can not reach the required speed, the turbine will not work. Especially now the city traffic jam is serious and the vehicle crawls at a low speed for a long time. At this stage, the difference between turbocharging and natural suction is not large. Compared with 1.0T with small displacement, 1.6L self-suction will highlight the shortage of low torsion. As a result, for ordinary household cars, self-priming feels smoother and the cost of later maintenance is lower.
WUXI SHENGYI TURBO is a professional enterprise producing turbocharger and turbo repair parts. has more than 300 turbocharger models for vehicles application as Garrett, Hitachi, Toyota, Mitsubishi, Benz, BMW, Audi, Ford, Jeep, Dongfeng .etc. Our turbochargers offer direct replacements to OEM models, also offer customized solutions to our customers. We adopt vanguard technology positively from home and abroad, and have established the long-term technical cooperation with many well-known enterprises. We have passed ISO9001:2000 in September, 2004. Now we own the floor space 5800 square meters. There are more than 50 workers including more than 10 technical staff who has the senior or intermediate title and more than 30 first-line workers who have rich experience in turbocharger. For more information please contact us firstname.lastname@example.org